Saturday, January 23, 2010

Motion Sensor Wall Switch Red Wire And Two Black Wires Coming Out Of Wall... Which Wires Are Which?

Red wire and two black wires coming out of wall... which wires are which? - motion sensor wall switch

I am replacing a light switch in the wall (3-way believe that name? Change) By a motion to. I removed the old switch, but now I have 3 son, I'm not sure what they are. Here is a description of these methods:

1 black wire - descending from the wall
1 wire and cable 1 black red - the climbing wall (for light)

My son is new switch has 2 black and 1 green line (talk about being on the ground in the instructions.) I think should go one of the black wire to black wire only goes through the wall and the black wire is all black or red, which goes to the wall. Then the green wire goes to the cable that goes to the left.

The cables must go about it?

1 comment:

  1. Have you removed the switch is a switch on three courses that you want to modify, replace one of two ways. This switch is incompatible with the nature of the three works, because it allows only light or turn off a zone. Back to the others, and finally a motion sensor designed for use with the three lines. The single black wire from the wall is your city, are the son of two other travelers. Hope this helps.

    ReplyDelete